Starting from:

$8

Linde H50D, H60D, H70D, H80D Diesel Forklift Truck 396-02 Series Operating Instructions, User Manual

Original Illustrated Factory Operating Instructions (User Manual) for Linde Diesel Forklift Truck Type 396-02, models H50D-02, H60D-02, H70D-02, H80D-02.

Original factory manuals for Linde Forklift Trucks, contains high quality images, diagrams and instructions to help you to operate, maintenance and repair your truck

Covered models:
   H50D-02
   H60D-02
   H70D-02
   H80D-02

Format: ZIP, Included files:
   Operating instructions, PDF, 282 Pages
   Customized options, PDF, 22 pages
Language: English

Contents:
   1. Introduction
    Your forklift truck
    Intended use
    Impermissible use
    Description of use and climatic conditions
    Symbols used
    Technical description
    Taking delivery of the industrial truck
    Legal requirements for placing on the market
    2. Safety
    Safety guidelines
    Residual risks
    Stability
    In the case of tip-over
    Handling consumables
    Competent person
    Regulations
    Fit attachments
    Fork carriage emergency lowering
    Emergency exit with attached rear window
   3. Overview
    Identification plates
    Truck overview
    Controls
    Display unit
    Switch panel
   4. Operation
    Service plan before initial commissioning
    Instructions for running-in
    Pre-shift checks
    Standard equipment
    Entering and exiting the truck
    Adjusting the standard driver`s seat and comfort driver`s seat
    Adjusting the height-adjustable comfort driver`s seat
    Adjusting the luxury driver`s seat
    Adjusting the armrest
    Adjusting the steering column
    Setting the clock
    Seat belt
    Starting and stopping the internal combustion engine (dual-pedal operation)
    Driving (dual-pedal operation)
    Starting and stopping the internal combustion engine (single-pedal operation)
    Driving (single-pedal operation)
    Steering system
    Brake system
    Signal horn
    Joystick with central lever operation
    Joystick with single lever operation
    Particle filter regeneration
    Special equipment
    Depressurisation
    Driver`s cab
    Lighting
    Windscreen wiper
    Window heater
    Heating system, air conditioning
    Linde Forklift Data Management (LFM)
    Adjusting the driver`s seat with rotating device
    Lift mast positioning
    Sweeper function
    Working with a load
    Before picking up a load
    Adjusting the fork arm distance
    Taking up loads
    Travelling with load
    Setting down loads
    Towingdevice
    Before leaving the truck
    Loading/transporting
    Removing the lift mast
    Securing the overhead guard against moving forwards or backwards
    Loading
    Transportation by lorry or low-bed semi-trailer
   5. Maintenance
    General information
    Inspection and maintenance data
    Recommendationsfor consumables
    Inspection and maintenance overview
    Service plan as required
    1000-hour service plan
    2000-hour service plan
    3000-hour service plan
    6000-hour service plan
    Engine
    Checking the engine oil level
    Changing the engine oil and engine oil filter
    Fuel
    Draining water from the fuel pre-filter
    Changing the fuel filter
    Changing the fuel pre-filter
    Bleeding the fuel system
    Cleaning the fuel tank ventilation hose
    Checking the coolant level
    Changing the coolant
    Checking the coolant concentration
    Cleaning the water cooler and hydraulic oil cooler, and checking them for leaks
    Checking the condition and secure positioning of the engine support and engine mounting
    Checking the condition and tension of the V-ribbed belt
    Changing the V-ribbed belt
    Changing the air filter cartridge
    Changing the air filter safety cartridge
    Checking the dust discharge valve
    Cleaning the prefilter (special equipment)
    Cleaning the oil bath airfilter (special equipment)
    Changing the oil in the oil bath air filter (special equipment)
    Checking the intake and exhaust pipes for leaks
    Draining water from the intercooler
    Checking the valve clearance
    Checking the particle filter system
    Changing spark plugs on the burner of the particle filter
    Changing the particle filter
    Changing the crankcase bleeder valve
    Gearbox
    Planetary transmission: Checking the oil level and checking for leaks
    Planetary transmission: Changing the oil and cleaning the magnetic plug
    Checking the fastenings ofthe axle clamps
    Checking the hydraulic pump`s mounting on the engine
    Chassis, bodywork and fittings
    Cleaning the truck
    Bonnet
    Floorplate
    Maintainingthe heating system and air conditioning (special equipment)
    Checking the seat belt for condition and function
    Checking the mounting ofthe chassis
    Overhead guard: Lubricating bearings
    Checking and oiling the bearing points and joints
    Washer system: Topping up the water tank
    Chassis frame
    Wheelchange
    Tightening the wheel fastenings
    Checking tyres for damage and foreign objects
    Check the tyre pressure
    Checking the condition of the antistatic belt
    Cleaning and lubricating the steering axle, checking the mounting
    Operating devices
    Checking the parking brake for correct operation
    Checking the pedal group
    Checking the bellows at the actuating lever
    Electrics
    Checking the condition and secure positioning of electric cables, cable connectors and connections
    Battery: condition check, disposal
    Hydraulics
    Changing the hydraulic oil
    Hydraulic system: Checking the oil level
    Hydraulic system: changing the filters
    Checking the bleeder valve on the hydraulic tank for correct operation
    Checking the hydraulic system for leaks
    Tilt cylinder: Checking the mounting
    Tilt cylinder: Lubricating bearing points
    Checking the pre-load of the double hoses
    Load lift system
    Working on the lift mast and at the front of the truck
    Cleaning and spraying the lift mast chain
    Checking the mounting, condition and function of the lift mast, lift mast chains, lift cylinders and end stops
    Adjusting the lift mast chain
    Checking fork arms and arm safety devices
    Lubricating the mast fixation
    Self-help
    Opening the cover to the electrical system
    Fuses for special electrical equipment
    Opening the central electrical system cover
    Fuses for basic electrical equipment
    Fuses for heating system, air conditioning (special equipment)
    Diagnostic connector
    Malfunctions during operation
    Malfunctions, causes and remedies: diesel engine
    Malfunctions, causes and remedies ° hydraulic system
    Jump start
    Towing
    Shutting down
    Shutting down the truck
    Disposal of old trucks
   6. Technical data
    Overview of dimensions
    Type sheet H50D-02
    Type sheet H60D-02
    Type sheet H70D-02
    Type sheet H80D-02
    Type sheet H80D-02/900
    Type sheet H80D-02/11 00
    Lift mast data type 1 95
    Truck configuration
    Tyre variants and rim sizes
    Load capacity diagrams
    Additional capacity rating plate for attachments
    Noise emission values
    Vibration characteristic values for bodily vibrations

More products