BOMAG BW213D-4, BW211D-4, BW211PD-4 SINGLE DRUM ROLLER MAINTENANCE AND OPERATING MANUAL

This is the COMPLETE maintenance and operating manual for Bomag BW213D-4, BW211D-4, BW211PD-4 Single drum roller.

Models Covered:
==========
Bomag BW213D-4 Single drum roller
Bomag BW211D-4 Single drum roller
Bomag BW211PD-4 Single drum roller

TABLE OF CONTENTS:
==========
BW213D-4 :
Technical Data
Safety regulations
Indicators and Controls
3.1 General notes
3.2 Description of indicators and control elements
Operation
4.1 General notes
4.2 Tests before starting to operate
4.3 Starting the engine
4.4 Starting with jump wires
4.5 Driving the machine
4.6 Switching the vibration on and off
4.7 Operating the parking brake, stopping the machine
4.8 Shutting the engine down
4.9 Emergency exit
4.10 Adjusting the steering wheel
4.11 Adjusting the seat
4.12 Operating the hood
4.13 Towing in case of an engine failure
4.14 Transport
Maintenance
5.1 General notes on maintenance
5.2 Fuels and lubricants
5.3 Table of fuels and lubricants
5.4 Running-in instructions
5.5 Maintenance chart
5.6 Check the engine oil level
5.7 Check, clean the water separator
5.8 Check the fuel level
5.9 Checking the hydraulic oil level
5.10 Check the coolant level
5.11 Checking the dust separator on the oil bath air filter
5.12 Checking the tire pressure
5.13 Clean the cooling fins on engine and hydraulic oil cooler
5.14 Check the oil level in the drive axle
5.15 Checking the oil level in left/right wheel hubs
5.16 Check the oil level in the vibration bearings
5.17 Changing engine oil and oil filter cartridges
5.18 Change the fuel filter cartridge
5.19 Draining the sludge from the fuel tank
5.20 Service the battery
5.21 Change the fuel pre-filter cartridge
5.22 Checking, replacing the refrigerant compressor V-belt
5.23 Service the air conditioning
5.24 Check, adjust the valve clearance
5.25 Checking / replacing the ribbed V-belt
5.26 Check the engine mounts
5.27 Change the oil in the drive axle
5.28 Changing the oil in the wheel hubs
5.29 Change the oil in the vibration bearings
5.30 Retighten the fastening of the axle on the frame
5.31 Tightening the wheel nuts
5.32 Check the ROPS
5.33 Cleaning the oil bath air filter
5.34 Changing hydraulic oil and breather filter
5.35 Changing the hydraulic oil filter
5.36 Changing the coolant
5.37 Checking the injection valves
5.38 Service the combustion air filter
5.39 Adjust the scrapers
5.40 Adjust the parking brake
5.41 Changing the tires
5.42 Change the fresh air filter in the cabin
5.43 Tightening torques
5.44 Engine conservation
Trouble shooting
6.1 General notes
6.2 Engine

BW211D-4 / BW211PD-4:
Technical Data
Safety regulations
Indicators and Controls
3.1 General notes
3.2 Description of indicators and control elements
Operation
4.1 General notes
4.2 Tests before starting to operate
4.3 Starting the engine
4.4 Starting with jump wires
4.5 Driving the machine
4.6 Switching the vibration on and off
4.7 Operating the parking brake, stopping the machine
4.8 Shutting the engine down
4.9 Emergency exit
4.10 Adjusting the steering wheel
4.11 Adjusting the seat
4.12 Operating the hood
4.13 Towing in case of an engine failure
4.14 Transport
Maintenance
5.1 General notes on maintenance
5.2 Fuels and lubricants
5.3 Table of fuels and lubricants
5.4 Running-in instructions
5.5 Maintenance chart
5.6 Check the engine oil level
5.7 Check, clean the water separator
5.8 Check the fuel level
5.9 Checking the hydraulic oil level
5.10 Check the coolant level
5.11 Checking the dust separator on the oil bath air filter
5.12 Checking the tire pressure
5.13 Clean the cooling fins on engine and hydraulic oil cooler
5.14 Check the oil level in the drive axle
5.15 Checking the oil level in left/right wheel hubs
5.16 Check the oil level in the vibration bearings
5.17 Changing engine oil and oil filter cartridges
5.18 Change the fuel filter cartridge
5.19 Draining the sludge from the fuel tank
5.20 Service the battery
5.21 Change the fuel pre-filter cartridge
5.22 Checking, replacing the refrigerant compressor V-belt
5.23 Service the air conditioning
5.24 Check, adjust the valve clearance
5.25 Checking / replacing the ribbed V-belt
5.26 Check the engine mounts
5.27 Change the oil in the drive axle
5.28 Changing the oil in the wheel hubs
5.29 Change the oil in the vibration bearings
5.30 Retighten the fastening of the axle on the frame
5.31 Tightening the wheel nuts
5.32 Check the ROPS
5.33 Cleaning the oil bath air filter
5.34 Changing hydraulic oil and breather filter
5.35 Changing the hydraulic oil filter
5.36 Changing the coolant
5.37 Checking the injection valves
5.38 Service the combustion air filter
5.39 Adjust the scrapers
5.40 Adjust the parking brake
5.41 Changing the tires
5.42 Change the fresh air filter in the cabin
5.43 Tightening torques
5.44 Engine conservation
Trouble shooting
6.1 General notes
6.2 Engine

=============

Model Specification: Bomag BW213D-4, BW211D-4, BW211PD-4 Single drum roller
LANGUAGE: English
FORMAT: PDF
Requirements: Adobe PDF Reader & WinZip.
ZOOM IN/OUT: YES
COMPATIBLE: All Versions of Windows & Mac

==============

FIND IT…PRINT IT…USE IT…then Trash it.

Tons of pictures and diagrams at your fingertips!!

All pages are printable, so run off what you need & take it with you into the garage or workshop.

Save Money $$ By doing your own repairs! These manuals make it easy for any skill level WITH THESE VERY EASY TO FOLLOW, STEP-BY-STEP INSTRUCTIONS!

INSTANT DOWNLOAD means NO SHIPPING COST or WAITING FOR A CD TO ARRIVE IN THE MAIL…YOU WILL RECEIVE THIS MANUAL TODAY VIA INSTANT DOWNLOAD ON COMPLETION OF PAYMENT VIA OUR SECURE PAYMENT PROCESSOR. WE ACCEPT ALL MAJOR CREDIT/DEBIT CARDS/PAYPAL.

Looking for some other Service Repair Manual, please check:
https://sellfy.com/fileto

Thanks for visiting!
Powered by