Starting from:
$29

$14.50

VSKYLABS Test-Pilot: Cicare-8 Project

The VSKYLABS Test-Pilot: Cicare-8 Project

JetManHuss - VSKYLABS (c) 2023 All Rights Reserved


A High Definition Ultralight Helicopter Simulation


Separate native products for X-PLANE 12 and X-PLANE 11, for your selection.


MINIMUM HARDWARE REQUIREMENTS FOR X-PLANE 12

 

Disk Space: 25GB
CPU: Intel Core i3, i5, i7, or i9 CPU with 4 or more cores, or AMD Ryzen 3, 5, 7 or 9.
(Those with other CPUs should try the demo before purchasing.)
Memory: 8 GB RAM
Video Card: a Vulkan 1.3-capable video card from NVIDIA or AMD with at least 2 GB VRAM
Note: Intel GPUs are not supported by X-Plane 12.


The VSKYLABS development of the Cicare-8 project for X-Plane flight simulator was approved by Cicaré S.A. However, it is an independent VSKYLABS project which is not affiliated with Cicaré S.A.


Project Introduction

 

This project is part of the VSKYLABS 'Test-Pilot' series, designed specifically for use with X-Plane cutting edge Flight Model.


The Cicare-8 ULM helicopter is an innovative ultralight helicopter, incorporating the vast experience of Mr. Augusto Cicaré and his team. The Cicare-8 was developed as a two seat helicopter, based on the platform of the successful Cicaré 7B and 7T helicopters. The Cicare-8 is also available as a kit.

The Cicare-8 helicopter incorporates the latest technology and materials, which allows low operating costs, low empty weight and higher payload, low fuel consumption, reliability, maneuverability and efficiency.

The project is setting up a highly detailed and highly accurate Cicare-8 simulation along with full VR compatibility.

It is highly recommended to visit the Cicare-8 website:
https://www.cicare.com.ar/en/cicare-8/


Project Main Features

 

  • VSKYLABS 'Test-Pilot' Project.
  • Highly defined flight dynamics model of the Cicare-8, built around the powerful, native X-Plane flight model.
  • Highly detailed model of the Cicare-8 helicopter.
  • Fully functional VR (Virtual Reality) Ready.
  • Built-in Avitab Compatibility (Avitab plugin not included).
  • Multi-Layer FMOD sound pack.
  • The project is under constant development: development road-map is including flight model refinements, enhanced systems depth, additional liveries and other improvements.
  • Autoupdater based on the SkunkCrafts autoupdater (XP12 only) - all updates are being pushed smoothly without the need to re-download the entire base package (base package will be updated every once in a while to minimize the gap).
  • Highly responsive VSKYLABS support.

Pilot's Operating Handbook

<Included in the product package>


Update Log

VSKYLABS Test-Pilot: Cicare-8 Project
JetManHuss - VSKYLABS (c) 2023 All Rights Reserved

 

XP12 - v3.0e (10th May 2023):

  • Flight dynamics - tuneup for tail-rotor responsiveness (was too responsive for desktop twisting joystick devices in the yaw axis).

XP12 - v3.0/3.0a/3.0c (5th April 2023 / 6-7th April 2023):

  • v3.0c - minor tail-rotor refinements.
  • v3.0a - bug fix - (rotor blades slap sounds in cold and dark).
  • Flight dynamics:
    • Major overhaul all-around to fall in line with X-Plane 12 latest FDM updates.
    • New skids physics.
    • Governor operation refinements.
  • Systems:
    • Annunciator panel re-programed/re-wired to electrical system.
    • Dual systems altimeter (replacement of older altimeter).
    • Artificial Horizon implemented as an option (to follow the XP11 feature).
    • LSA autopilot re-wired to a new electrical/LED system.
  • Sounds:
    • New FMOD 2.0 sounds.
  • Visualization:
    • Interior/cockpit - remodeled with higher mesh resolution.
    • LSA autopilot 3-d model improvements.
    • Front panel remodeled with higher mesh resolution and improved textures.
    • Cyclic (stick) animation addition (compensation in roll axis).
    • Interior and exterior glass rework.
    • Rotor disc animation enhancements.
    • Liveries refinements.
    • Paint-Kit was added to the project.

XP12 - v2.2 (4th December 2022):

  • Interior lighting system reset and retuned to comply with the modified X-Plane 12.00r1+ lighting engine.

XP12 - v2.1 (23th November 2022):

  • Updater software replaced - from STMA to SkunkCrafts. 

XP12 - v2.0 (September 2022):

  • X-Plane 12 version release.

XP11 -  v1.2 (5th December 2019):

  • Flight dynamics *Major Update* (planned - not bug fixes):
    • Flight envelope validation phase-2 update!
    • Autorotation RPM is now covering the entire range (low/high).
    • Main rotor inertia and overall performance tune-up (throughout the flight envelope).
    • Complete propulsion train tune-up to demonstrate the rated 115hp power (continuous).
    • Landing skids physics is now permitting a bit more heavy touchdown. 

XP11 - v1.1 (26th November 2019):

  • Systems - Night-Flight Pack was added:
    • Cockpit lighting for night-flying was set.
    • Master power 'ON' now gives power to cockpit lighting.
    • Artificial Horizon display was added (optional - toggle between Turn & Slip indication).
  • Systems - General:
    • Fixed 'Gov Range' warning light illuminates at night-time.
    • Fixed Autopilot turn rate display LED at night.
    • Optional Altimeter display with hPa input system.
    • Altimeter pressure setup sensitivity was tuned to allow higher setting resolution.
  • Modeling/PBR:
    • Fixed tablet holder (PRB).
    • Various texturing fixes.
  • Manual/POH:
    • Manual/POH was updated to rev.002

XP11 - v1.0a (24th November 2019):

  • New default liveries:
    • Four new liveries were added to the project.

XP11 - v1.0 (20th November 2019): Initial Version Release

 

More products