ATM Single coil profile pack for the Kemper profiling Amplifier

the single coil pack is suited for strats, teles and all splittable humbuckers. It won't produce good results on Humbuckers due to all SC tweaks I took.

Please find the direct input files in their own folder. These are RAW untweaked profiles. All merged rigs were directly made from these profiles by matching a great JTM cab and tweaking them.

You'll find a good selection of FXs on each rig, in their own context. Most cleans include a dist stomp to switch from clean to lead on the same rig. On crunches and drives the dist stomps are mainly used to change the color of the drive. You'll find a compressor if needed and a special EQ designed to clarify the tone a bit more : it will remove any boomynes and boxyness.

DISENGAGE ALL stomps FX and post FX locks to get the best tone. Most rigs are already tweaked, you'll just need to adjust the volume pot on your guitar or the kpa's gain pot if specified.


Content of the pack : 9 direct profiles & 14 merged profiles (JTM cab) 


  • dry clean

  • full clean

  • bright clean

  • dimed clean

  • jazz

  • voxy

  • crunch1

  • crunch2

  • crunch3

  • drive1

  • drive2

  • Jimi

  • lead1

  • lead2



here are a few details about the content :


dry clean : best suited for very clean parts where the guitar cuts the mix - takes FX very well - great for recording, blues

full clean : favorite among beta testers, this one sounds really great and open on it's own, great for live & chording and all sorts of tones - Be sure to play around with your guitar vol pot on this one.

bright clean : specially designed for fast funk chording with treble enhanced. Cuts the mix pretty well

dimed clean : this one is used for blues or jazz, for riffs, leads licks and darker chordal work

jazz : similar to dimed and optimized for jazz tones with specific tone stack and FX.

crunch1 : lots of personality in this one, fender territory for all kinds of tones : blues, rock'n roll, funk ... Adjust the gain until you get a satisfying crunch

crunch2 : a bit more driven and a bit more tailored for leads, but will still allow strumming

crunch3 : another color in crunch

drive1 : cranked amp rhythm or lead tone, lots of growl and a typical 70's soul. Up the gain to get the needed drive

drive2 : lots of overdrive on this monster, the most modern tone you'll get from the AMT. Do not touch the gain on this one : it's much better to adjust the guitar volume instead. This way you'll lower the drive AND keep the great punch.

Jimi : this one is designed to mimic super-cranked Hendrix's tone, while still having some great clean rhythm with a low volume pot on the guitar. Best used on a neck strat pickup. Included FX are 2 types of distortion pedal (they also work together) and a great rotary sim.

Voxy : typical vox vibe perfect for old time rock'n roll and early Who/Led Zep stuff, also great for blues.

lead1&2 : full, warm, articulate and punchy, very similar to boogie mark series lead tones. If you lower your guitar vol pot you will travel in time : 8/9 90's , 7 80's , 5 70's ...


All trademarks are trademarks of their respective owners, which are in no way associated or affiliated with valve theory profiling. These trademarks are used solely for the purpose of describing a certain amplifier, speaker, mic or a pedal during profiling and trying to produce similar sound with profile packs
Powered by