Linde Pallet Stacker Type 139: L12R, L16R Operating Instructions (User Manual)

Original Illustrated Factory Operating Instructions (User Manual) for Linde Pallet Stacker Type 139.

Original factory manuals for Linde Forklift Trucks, contains high quality images, circuit diagrams and instructions to help you to operate and repair your truck

Covered models:
L12R
L16R

Format: PDF, 62 Pages
Language: English

Contents:

Description 
    Plates and labels
    Technical characteristics
    Technical description
    Overview
    Controls
    Indicators
    Hour meter (operation)
    Battery discharge limiter indicator
Startup I Daily checks and work before startup
    Safety rules
    Definition of safety terms
    Use of ingredients
    Periodic checks on the pallet truck
    Recommendations for startup
    Checks before first startup
    Daily checks before use
    Checking forward/reverse and raise/lower controls .
    Checking electrical steering
    Checking the brakes
    Checking the emergency stop and driver presence button
    Checking the parking brake switch
    Checkingthe horn
    Checking the mast protection shield
    Checking the battery charge condition
    L12R - L16R: opening and closing the battery compartment
    L12RI - L16RI: opening and closing the battery compartment
    Connecting the battery connector
    Recharging the battery with an external charger
    Checking the condition of cables, terminals and the battery connector
    Checkingthe electrolyte level and topping up with water.... .
    Checking the electrolyte density
    Removing and replacing the battery
    Replacing the battery from the side using a trolley with rollers
Use
    Usage recommendations
    Adjusting the seat
    Startup
    Emergency stop button
    Seat safety
    Parking brake inverter switch
    Identifyingthe running direction
    Steering
    Turning direction in forward running
    Control of the horn
    Driving
    Forwardrunning
    Reversingthe running direction
    Driver presence button
    Using the pallet truck on a slope
    Going up and down slopes
    Starting on a slope
    Electromagnetic braking
    Electric foot brake
    Braking by reversing the running direction
    Parking brake
    L.B.C,automatic braking
    Using the mast
    Raising and lowering the fork support apron
    Raisingand lowering the initial lift
    Fork high safety devices
    Handlingloads
    Reading the load diagram
    Picking up the load on the ground
    Transporting a load
    Putting a load down on the ground
    Stacking a load
    Picking up a load above ground level
    Before leaving the pallet truck
    Slinging/liftingthe pallettruck
    Towing
    Removing the mast
    Transport and storage of the pallet truck
Maintenance
    General comments
    Work on the lifting mast
    Simplex lifting mast
    Safety device for the simplex lifting mast
    Standard lifting mast
    Safety device for the standard lifting mast
    Duplex lifting mast
    Safety device for the Duplex lifting mast
    Triplex lifting mast
    Safety device for the Triplex lifting mast
    Inspection and maintenance work after the first
    50 hours of service*
    Maintenance work calendar
Maintenance depending on needs
    Cleaning the pallettruck
    Cleaning and greasing the chains
    Cleaning and greasing the mast
    Opening the motor compartment cover
    Removing the platform surface
    Removing the steering wheel
    Removingthe dashboard
    Checking the fuses
    Cleaning the steering ring gears
    Checking attachment and condition of wheels
    Fixingand adjusting stabilizing wheels
    Checkingthe electrolyte level and topping up with water
    Checking the electrolyte density
    Checking the condition of cables, terminals and the battery connector
    Cleaning the battery and its compartment
Maintenance every 500 hours
    Lubrication of the traction unit orientation bearing 
    Lubrication of the initial lift return lever
    Checkingthe various hinge pins
    Checking the reduction gear oil level
    Checkingthe hydraulic fluid level
    Checking for leaks in the hydraulic circuit
    Checking the condition and attachment of the mast and chains
    Adjusting the length of mast chains
    Checking the condition and attachment of electrical cables and connections
    Cleaning the electrical plate and checking contact wear
    Adjusting the electromagnetic brake
    Inspection of traction motor brushes, and replacement if necessary
    Inspection of steering motor brushes, and replacement if necessary 
Maintenance every 1000 hours
    Inspection of the pump motor brushes, and replacement if necessary
    Cleaning the intake strainer
    Replacing the hydraulic fluid return filter
    Checking the mechanical attachment of devices
    Maintenance every 2000 hours
    Cleaning the intake strainer
    Replacing the hydraulic fluid return filter
    Replacingthe hydraulic fluid
    Replacing the reduction gear oil
    Recommended lubricants
    Technical characteristics
    Hydraulic diagrams 
    Electrical diagrams for L12R without LI
    Electrical diagrams for L12R with LI 
Index
Powered by