CSIS 330 Quiz 7 Liberty University complete answers

CSIS 330 Quiz 7 Liberty University complete answers

Buy this one and get an A grade for sure! Complete all different versions!

LUO TA and liberty university professor guide versions all the solutions are here.

 

· Question 1

 

 
 
 
Using an IPv4 network address of 192.168.2.0/26, how many subnets are possible?
 
 
 
 
 
 
 
·         Question 2

1 out of 1 points

 
 
 
You are given an IPv4 network address of 192.168.10.0/24 by your ISP.  You need to subnet this network.  You know that the subnet mask will be 255.255.255.252. How many usable hosts per subnet are possible in this design?
 
 
 
 
 
 
 
·         Question 3

1 out of 1 points

 
 
 
You have a network that needs 29 subnets while maximizing the number of host addresses available on each subnet.  How many bits must you borrow from the host portion of a classful network address to provide the correct subnet mask?
 
 
 
 
 
 
 
·         Question 4

1 out of 1 points

 
 
 
The IP address 198.10.132.67 /26 is a network address.
 
 
 
 
 
 
 
·         Question 5

1 out of 1 points

 
 
 
How many subnetworks can you have with a /18 prefix?
 
 
 
 
 
 
 
·         Question 6

1 out of 1 points

 
 
 
What is the network address for the host assigned to 172.16.4.35/24 ?
 
 
 
 
 
 
 
·         Question 7

1 out of 1 points

 
 
 
The IP address 192.168.15.96 /27 is a network address.
 
 
 
 
 
 
 
·         Question 8

1 out of 1 points

 
 
 
A network administrator needs to create a new network that has 14 computers and two router interfaces (Hint: that’s a total of 16 host addresses needed).  What subnet mask will provide the appropriate number of IPv4 addresses for this network with minimal wasted addresses?
 
 
 
 
 
 
 
·         Question 9

1 out of 1 points

 
 
 
Routers and firewall devices have an IP address assigned to each interface.
 
 
 
 
 
 
 
·         Question 10

1 out of 1 points

 
 
 
How many hosts per network can you have with a subnet mask of 255.255.192.0?
 
 
 
 
 
 
 
·         Question 11

1 out of 1 points

 
 
 
IPv4 subnets are created by using one or more of the ____________ bits as ____________ bits.
 
 
 
 
 
 
 
·         Question 12

1 out of 1 points

 
 
 
Network administrators can group devices and services into subnets that are determined by _____________.
 
 
 
 
 
 
 
·         Question 13

1 out of 1 points

 
 
 
Using an IPv4 network address of 192.168.2.0/26, what is the broadcast address in the second subnet (i.e. subnet[1])?
 
 
 
 
 
 
 
·         Question 14

1 out of 1 points

 
 
 
What is the first step in planning network subnets?
 
 
 
 
 
 
 
·         Question 15

 

 
 
 
Using an IPv4 network address of 192.168.2.0/26, how many usable hosts per subnet are possible?
 
 
 
 
 
 
 
·         Question 16

1 out of 1 points

 
 
 
In creating subnets for IPv6, conversion to binary is not required.
 
 
 
:
 
 
 
 
 
 
·         Question 17

1 out of 1 points

 
 
 
Any network resource, such as a server or a printer, should always have a dynamic IP address.
 
 
 
 
 
 
 
·         Question 18

1 out of 1 points

 
 
 
Which of the following needs are addressed in performing a network requirement study to plan subnets?
 
 
 
 
 
 
 
·         Question 19

1 out of 1 points

 
 
 
Using an IPv4 network address of 192.168.2.0/26, what is the first usable host address in the first subnet (i.e. subnet[0])?
 
 
 
 
 
 
 
·         Question 20

1 out of 1 points

 
 
 
How many subnetworks can you have with a /20 prefix?
 
 
 
 
 
 
 
·         Question 21

1 out of 1 points

 
 
 
Which of the following subnet masks is used to represent a prefix mask of / 26
 
 
 
 
 
 
 
·         Question 22

1 out of 1 points

 
 
 
Which class of IP address provides a maximum of only 254 host addresses per network ID?
 
 
 
 
 
 
 
·         Question 23

1 out of 1 points

 
 
 
Within a network, there are two addresses that cannot be assigned to devices.  These addresses are the __________________.
 
 
 
 
 
 
 
·         Question 24

1 out of 1 points

 
 
 
With VLSM, the subnet mask will vary depending on how many bits have been borrowed for a particular subnet.
 
 
 
 
 
 
 
·         Question 25

1 out of 1 points

 
 
 
To determine whether traffic on a network is local or remote, a router uses a ______________________.
 
 
 
 
Powered by