Non-Linear Data Structures and Programming in C++  Lab 1   Solution

Non-Linear Data Structures and Programming in C++ Lab 1 Solution

For this programming lab, you are to implement the seven Dynamic Set Operators using a Binary Search Tree (BST). 

The nodes for your tree will contain a string (the “key”), an integer (a piece of “Satellite data,” to count the number of times the string has been seen), and of course, left and right child pointers.  You may implement the parent pointer, if you think it will help you implement your solution, but it is not required.

 

Your program will consist of a loop within main, which will accept commands from the keyboard, and execute them one-at-a-time. The commands your program must support are:

insert <string       If <string is already IN the set, increment the count (stored in the node
                                    containing <string)

                                    If <string is NOT already in the set, add it to the set (and set the count to 1)

                                    In either case, send <string <count to cout

delete <string       If <string is NOT in the set, output <string <-1.

If <string IS in the set, and has a count of more than 1, decrement the count corresponding to the string, and output <string <nnn, where nnn is the new count

If <string IS in the set, and has a count of exactly 1, delete it from the set,

and output <string <0

search <string       If <string is in the set, output <string <nnn, where <nnn is the count
                                    for the string.

                                    If <string is not in the set, output <string <0

min                             Output <string, where <string is the minimum value of the set.  If the
                                    set is empty, output a blank line

max                             Just like min, except output the maximum value of the set (or a blank line)

next <string            If <string is in the set, output its successor <string.  If <string
doesn’t have a successor, or if it isn’t in the set, output a blank line

prev <string            Just like next, except output the predecessor of <string

list                           Does an in-order traversal, listing all of the strings in the tree in ascending order,
                                    along with the number of times each appears

help                           List the commands available to the user

exit                           Terminate the program

 

Note: the angle brackets shown above (<) are not to be used for input or output; they’re shown only to indicate that a string <string or a number (<nnn) is to be input or output (see sample input/output below).

All of your lines of output should end in a new line (<< endl or “\n”)

Your input commands should be case-insensitive, but not the strings on which the commands operate (i.e., “cat” and “Cat” are two different strings, but “insert cat” and “InSeRt cat” would do the same thing).  The strings will be single words, so you don’t have to worry about parsing entire lines.

 

You should implement the BST as a class (perhaps called BST?), using an #include file for the interface, and a .cpp file for the implementation (see Savitch pp. 476-488).  If you implement the nodes as their own class (a struct will suffice, so you don’t have to), then you’ll need another .h/.cpp pair for that, too.

 

Some of you may have had occasion to code in C (or in “C-Style” C++) somewhere along the way.  You should NOT use the old-style C-Strings; rather, use the new standard string class (see chapter 9, Savitch).  The new class functions much more like Java’s String class, and in some ways is even more flexible (for example, you can use the == operator to compare the contents of two strings, rather than their references).

 

You already have snippets of code (in the lecture slides) for some of the operations you will need, and you have pseudocode for all of the set operators.  You may need to code some other methods, but the main ones should be rather straightforward. 

 

All code you write for this assignment must be yours and yours alone (except for what is in the lecture slides and the Savitch text, of course).  You may not use any code from any other source, including the Internet, even as a reference.  Using code other than what you write (or are explicitly permitted to use) will be considered academic dishonesty, and will be dealt with in most severe terms.

 

Sample input and output:

 

Input                           Output            

search cat     cat 0

min            <no output

max            <no output

next cat       <no output

insert cat     cat 1

insert cat     cat 2

search cat     cat 2

delete cat     cat 1

insert dog     dog 1

list           cat 1

              dog 1

next cat       dog

prev dog       cat

 


 

Your program should utilize good programming practices – information hiding, etc.  Your public methods should not give away HOW the BST works – main() should never see your BST’s root pointer, for example.  You will have to create some public methods that, in turn, call private methods to get the job done.  Your “dynamic set” could just as easily be implemented with arrays, a linked list, or something else. What gives it its behavior is its interface; not its implementation!

 

Your code must be well-documented:

·         Use block comments at the start of each method, briefly explaining what it does, and how it does what it does.

·         Use line comments liberally to explain what’s going on

·         Use internal documentation, like descriptive variable names where appropriate

·         Make SURE you have a suitable block header on ALL of your source files WITH YOUR NAME!

 

Some helpful starting points:

·         Create your program as a Win32 Console application within VS 2015

·         Your program should use the std namespace; NOT the System namespace

·         To get access to cin and cout, use “#include <iostream”

·         To get access to the string class and its supporting code, “#include <string”

 


If you run into problems, and have made a good attempt at solving them, e-mail me, rather than WASTIng time lost in the wilderness

 

I strongly suggest your write this code incrementally.  You might want to start with just the command-soliciting loop.  Next build a shell of the BST class, and finally, implement and test the functionality one method at a time.

 

To turn in your program, use 7-Zip (www.7-zip.org) to create a compressed archive of your entire Visual Studio workspace (don’t just submit your source and/or .exe files).  Submit your 7-Zip archive to Blackboard.  If, for some reason, 7-Zip is not a practical alternative for you, I will accept .zip archives, but not .rar or any other format, unless you clear it with me ahead of time.

 

As for testing, you may want to create some test scripts, and store them in text files.  Assuming you called your program BST, then you can redirect input from a text file (from the command line) using the “<” operator.  If TEST1.TXT contains a set of data you want to test your program against, then you can use BST < TEST1.TXT to have the input that would have come from the keyboard come instead from TEST1.TXT
Powered by