Race Boat Solution

Race Boat Solution

In this project, you will make Race Boat application. Each Race Boat has a name. The name of the boats should be read from a file “boats.txt”. You can assume there will be a maximum of 100 boats. Copy and paste the following boat names in the boat.txt file:

Sea Monkey


Cast Away



The application should be able to accept commands from the user. The user has to provide the commands in the following format:

<Boat name, <command


Sea Monkey, power on

Sea Monkey, turn left

Sea Monkey, speed up

The acceptable commands are the following (Any other command should be considered invalid):

Command (1st line in bold)

Description (2nd line non-bold):

power on

This commands powers up the boat

power off

This commands powers off the boat

speed up

This commands increases the boat speed by the minimum speed increment 2 mph

slow down

This commands decreases the boat speed by the minimum speed decrement 2 mph

turn left

This commands turns the boat to the left by the minimum left turn degree 5 deg

turn right

This commands turns the boat to the right by the minimum right turn degree 5 deg

After each command is entered and executed, the state of the boat should be output.

Backdraft at the speed of 10 mph moving in the direction 330 deg.
Powered by