New Holland Backhoe Loaders B-Series: B110, B115 Workshop Service Manual

Original Illustrated Factory Workshop Service Manual for New Holland Backhoe Loaders B-Series. 
Original factory manuals for New Holland Trucks, contains high quality images, circuit diagrams and instructions to help you to operate, maintenance and repair your truck. All Manuals Printable, contains Searchable Text
 
Covered models:
    B110
    B115
 
Format: PDF, 993 Pages
Language: English
 
Contents:
    SECTION 00-SAFETYPRECAUTIONS
    SECTION 01-MAINTENANCE
    SECTION 02 -TECHNICAL SPECIFICATIONS
        1.MODELS 
        2.IDENTIFICATION OF MAIN COMPONENTS
        3.TECHNICAL SPECIFICATIONS
        4.LOADER ATTACHMENT DIMENSIONS AND PERFORMANCE 
        5.BACKHOE ATTACHMENT DIMENSIONS AND PERFORMANCE 
        6.LIFTING CAPACITIES 
        7.LOADER BUCKET WITH FORKS DIMENSIONS AND PERFORMANCE 
        8.FLUID AND LUBRICANT CAPACITIES AND SPECIFICATIONS 
    SECTION 17-TORQUECONVERTERS
        1. POWERSHUTTLE TORQUE CONVERTER 
            1.1 DESCRIPTION AND OPERATION
            1.2 TECHNICAL SPECIFICATIONS
            1.3 OVERHAUL 
            1.4 INSPECTION 
            1.5 DISASSEMBLY AND ASSEMBLY
            1.6 STALL TEST 
            1.7 FAULT FINDING 
        2. POWERSHIFT TORQUE CONVERTER 
            2.1 DESCRIPTION AND OPERATION
            2.2 TECHNICAL SPECIFICATIONS
            2.3 OVERHAUL 
            2.4 INSPECTION 
            2.5 DISASSEMBLY AND ASSEMBLY
            2.6 STALL TEST 
            2.7 FAULT FINDING 
    SECTION 21 -TRANSMISSION
        1.POWERSHUTTLE TRANSMISSION ³TURNER MODEL COM-T4-2025´ 
            1.1 TECHNICAL SPECIFICATIONS
            1.2 TIGHTENING TORQUES 
            1.3 TRANSMISSION CONTROLS
            1.4 LUBRICATION 
            1.5 TRANSMISSION OIL FLOW AND SUPPLY
            1.6 TRANSMISSION HYDRAULIC VALVES AND PRESSURE TEST POINTS 
            1.7 TRANSMISSION POWER FLOW
            1.8 TRANSMISSION 4WD COMPONENTS 
            1.9 TRANSMISSION REMOVAL 
            1.10 DISASSEMBLY AND ASSEMBLY
            1.11 FAULT FINDING 
            1.12 SPECIAL TOOLS
        2.POWERSHIFT TRANSMISSION ³DANA T16000´ 
            2.1 TECHNICAL SPECIFICATIONS 
            2.2 TRANSMISSION CONTROLS 
            2.3 LUBRICATION 
            2.4 PRESSURE SPECIFICATIONS AND CHECK POINTS 
            2.5 TRANSMISSION COOLER
            2.6 TRANSMISSION HYDRAULIC DIAGRAM 
            2.7 OPERATION 
            2.8 POWER FLOWS 
            2.9 GEAR AND CLUTCH LAY OUT 
            2.10 TRANSMISSION REMOVAL AND INSTALLATION 
            2.11 TRANSMISSION COMPONENTS 
            2.12 DISASSEMBLY AND ASSEMBLY 
            2.13 SPECIAL TOOLS 
            2.14 FAULT FINDING 
            2.15 FAULT FINDING 
    SECTION 25 -FRONTAXLES
        1.FRONT AXLE 4WD ³CARRARO´ 
            1.1 TECHNICAL SPECIFICATIONS 
            1.2 DISASSEMBLY AND ASSEMBLY 
            1.3 FAULT FINDING 
        2.FRONT AXLE 4WS ³CARRARO´ 
            2.1 TECHNICAL SPECIFICATIONS 
            2.2 DISASSEMBLY AND ASSEMBLY 
            2.3 FAULT FINDING 
        3.SPECIAL TOOLS 
    SECTION 27-REAR AXLE
        1. REAR AXLE 2WS 
            1.1  DESCRIPTION AND OPERATION 
            1.2 TECHNICAL SPECIFICATIONS 
            1.3 DISASSEMBLY AND ASSEMBLY 
            1.4 FAULT FINDING 
        2. REAR AXLE 4WS ³CARRARO´ 
            2.1 TECHNICAL SPECIFICATIONS 
            2.2 DISASSEMBLY AND ASSEMBLY 
            2.3 FAULT FINDING 
        3.SPECIAL TOOLS 
    SECTION 33-BRAKESSYSTEM
        1.TECHNICAL SPECIFICATIONS 
        2.HAND BRAKE 
            2.1 HAND BRAKE ADJUSTMENT
        3. BRAKE CYLINDERS 
        4.OIL BRAKE TANK
        5.BLEEDING PROCEDURE 
    SECTION 35 -HYDRAULIC SYSTEM
        1.HYDRAULIC DIAGRAMS 
            1.1 HYDRAULIC DIAGRAM - 2WS SIDESHIFT MECHANICAL MODELS 
            1.2 HYDRAULIC DIAGRAM - 2WS SIDESHIFT PILOT MODELS 
            1.3 HYDRAULIC DIAGRAM - 2WS CENTRE PIVOT PILOT MODELS 
            1.4 HYDRAULIC DIAGRAM - 4WS SIDESHIFT MECHANICAL MODELS 
            1.5 HYDRAULIC DIAGRAM - 4WS SIDESHIFT PILOT MODELS 
            1.6 HYDRAULIC DIAGRAM - 4WS CENTRE PIVOT PILOT MODELS 
        2.HYDRAULIC PUMP 
            2.1 DESCRIPTION AND OPERATION
            2.2 TECHNICAL SPECIFICATIONS
            2.3 LOAD SENSING VALVE 
            2.4 REMOVAL 
            2.5 COMPONENTS 
            2.6 DISASSEMBLY AND ASSEMBLY
        3.CONTROL VALVES 
            3.1 CONTROL VALVES ³REXROTH´ (MECHANICAL MODELS) 
            3.2 CONTROL VALVES ³REXROTH´ (PILOT MODELS) 
            3.3 SOLENOID VALVE FOR PILOTING THE BACKHOE CONTROL VALVE (WITH HYDRAULIC CONTROL) 
            3.4 RELIEF VALVES 
            3.5 ACCUMULATOR GLIDE RIDE ³PARKER´
        4. HYDRAULIC SWING SYSTEM 
            4.1 DESCRIPTION AND OPERATION
            4.2 HYDRAULIC OIL FLOW 
        5.HYDRAULIC CYLINDERS 
            5.1 LOADER CYLINDER 
            5.2 LOADER BUCKET CYLINDER 
            5.3 4X1 BUCKET CYLINDER 
            5.4 BACKHOE BOOM CYLINDER 
            5.5 BACKHOE DIPPER CYLINDER 
            5.6 BACKHOE BUCKET CYLINDER
            5.7 SHORT AND LONG TELESCOPIC CYLINDER
            5.8 STABILIZER CYLINDER (CENTRE PIVOT MODELS) 
            5.9 STABILIZER CYLINDER (SIDESHIFT MODELS) 
            5.10 SWING CYLINDER
            5.11 BACKHOE SIDESHIFT LOCKING CYLINDER (SIDESHIFT) 
            5.12 SPECIAL TOOLS
        6.HYDRAULIC CONTROL LEVERS 
            6.1 TECHNICAL SPECIFICATIONS
            6.2 DESCRIPTION AND OPERATION
            6.3 DISASSEMBLY AND ASSEMBLY
            6.4 CONTROL LEVER VALVE 
        7.FAULT FINDING AND FLOW TESTING 
            7.1 PRELIMINARY CHECKS
            7.2 FAULT FINDING (WITH ³REXROTH´ CONTROL VALVES)
    SECTION 39 -CHASSIS
         1.DESCRIPTION AND OPERATION 
         2.REMOVAL AND INSTALLATION COMPONENTS 
             2.1 COMPONENTS WITHIN THE CHASSIS
             2.2 COMPONENTS BELOW THE CHASSIS 
             2.3 COMPONENTS ATTACHED OUTSIDE THE CHASSIS 
             2.4 COMPONENTS ATTACHED ABOVE THE CHASSIS
             2.5 TIGHTENING TORQUES 
    SECTION 41-STEERING SYSTEM
        1.STEERING SYSTEM 2WS 
        2.STEERING SYSTEM 4WS 
        3.POWER STEERING 
        3.1 TECHNICAL SPECIFICATIONS 
        3.2 COMPONENTS 
        3.3 DISASSEMBLY AND ASSEMBLY 
        3.4 SPECIAL TOOLS 
        3.5 FAULT FINDING 
    SECTION 50-CAB HEATIN G AND AIR CONDITIONING
        1.TECHNICAL SPECIFICATIONS 
        2.CAB HEATING 
            2.1 DESCRIPTION AND OPERATION 
        3. AIR CONDITIONING
            3.1 PRINCIPALS OF AIR CONDITIONING 
            3.2 SAFETY PRECAUTIONS 
            3.3 DESCRIPTION AND OPERATION 
            3.4 FAULT FINDING AND TESTING 
            3.5 FLUSHING THE SYSTEM 
            3.6 EVACUATING THE SYSTEM 
            3.7 CHARGING THE SYSTEM 
            3.8 COMPONENTS OVERHAUL
            3.9 COMPRESSOR 
            3.10 SPECIAL TOOLS 
    SECTION 55-ELECTRICAL SYSTEM
        1.GENERALITIES 
            1.1 TEMPORARY WIRING HARNESS REPAIR 
            1.2 FAULT FINDING 
        2.ELECTRICAL DIAGRAMS 
            2.1 ELECTRICAL DIAGRAMS - POWERSHUTTLE CAB 
            2.2 ELECTRICAL DIAGRAMS - POWERSHIFT CAB 
            2.3 ELECTRICAL DIAGRAMS - 4WS 
        3.CONTROLS AND INSTRUMENTS
            3.1 FRONT INSTRUMENT PANEL 
            3.2 CALIBRATION OF SPEEDOMETER
            3.3 SIDE INSTRUMENT PANEL 
            3.4 IMMOBILISER CIRCUIT 
        4.DIAGNOSTICS DISPLAY 
            4.1 SYMBOL 
            4.2 SETUP MENU 
            4.3 SETUP MENU 
            4.4 PROCEDURE ABOUT SELF TEST 
            4.5 ON BOARD ERROR CODE RETRIEVAL 
            4.6 BACKLIGHTING AND DIMMING
            4.7 WORK HOURS 
            4.8 FUNCTIONAL DESCRIPTION 
            4.9 MAINTENANCE 
            4.10 WARNING MESSAGES 
        5.STARTING SYSTEM 
            5.1 DESCRIPTION AND OPERATION
            5.2 FAULT FINDING 
            5.3 STARTER MOTOR 
        6.ALTERNATOR 
            6.1 TECHNICAL SPECIFICATIONS
            6.2 DESCRIPTION AND OPERATION
            6.3 COMPONENTS 
            6.4 REMOVAL 
            6.5 PRELIMINARY CHECK AND TESTS 
            6.6 FAULT FINDING 
        7.BATTERY 
            7.1 TECHNICAL SPECIFICATIONS
            7.2 DESCRIPTION AND OPERATION
            7.3 BATTERY REPLACEMENT 
            7.4 MAINTENANCE 
            7.5 TESTS 
            7.6 CONNECTING A BOOSTER BATTERY 
            7.7 BATTERY MASTER SWITCH 
        8.COMPONENT TESTING 
            8.1 GENERAL INTRODUCTION 
            8.2 COMPONENT TESTING 
            8.3 GROUND POINTS
            8.4 KEY-START AND STOP SWITCH 
            8.5 ALTERNATOR 
            8.6 TRANSMISSIONS 
            8.7 PARKING BRAKE SWITCH 
            8.8 CAB 
            8.9 4WD SWITCH 
            8.10 BRAKE PEDAL SWITCHES 
            8.11 BRAKE OIL LEVEL SWITCH
            8.12 FRONT WORK LAMP SWITCH (1) - REAR WORK  LAMP SWITCH (2) MAIN LIGHT SWITCH 
            8.13 HAZARD SWITCH 
            8.14 FLASHER MODULE 
            8.15 MULTI FUNCTION SWITCH 
            8.16 FRONT WIPER MOTOR (1) - REAR WIPER MOTOR - (2) 
            8.17 4WS -STEERING SELECTOR SWITCH 
            8.18 STEERING CONTROL UNIT
            8.19 4WS REAR AXLE STEERING SENSOR 
            8.20 4WS FRONT AXLE STEERING SENSOR 
            8.21 STEERING SOLENOIDS
            8.22 DIFFERENTIAL LOCK SWITCH (1) 
            8.23 LOADER 
            8.24 BACKHOE
            8.25 REVERSING BUZZER
            8.26 FUEL LEVEL SENDER 
    SECTION 82-LOADER
        1.LOADER ATTACHMENT CONTROLS 
        2.LOADER BUCKET SELF LEVELING 
        3.LOADER ATTACHMENT SAFETY STRUT 
        4.LOADER BUCKET REMOVAL 
        5.LOADER REMOVAL (2WS) 
        6.LOADER REMOVAL (4WS) 
    SECTION 84 -BACKHOE
        1.DESCRIPTION AND OPERATION 
        2.BACKHOE ATTACHMENT MECHANICAL CONTROL VERSION 
        3.BACKHOE ATTACHMENT HYDRAULIC CONTROLS VERSION 
        4.REMOVAL AND INSTALLATION 
        5.TELESCOPIC DIPPER REVISION .
Powered by