Updated: Version 11

Added new updated format LUTS, Orange & Teal versions of all LUTs, Cine4, Slog2 & Slog3.

Added Gamma Curves and Roll Off together with Sony DELUTS Primary Master Gamut. Use these as the first lut in the chain or add to Techinal in Premiere.

Matrix mapping base on ARRI Alexa also helps bring colours into uniform with DELUTS Universe products.

Easy to install with Adobe Premiere Pro CC 2015.3 to 2018.* onwards.
FCPX 10.4 now supports native DELUTS luts. Also compatible with most appliactions that support .cube luts.


For Premiere CC 2018 follow this path from the download zip file. "DELUTS CINE4 SLOG2 SLOG3 Rev9/Adobe Installers/Adobe Premiere Pro CC (2015.3 to 2018) Installer only/Mac and PC/

This pack contains:

137 Creative Colour Grading LUTs for SLOG2 & SLOG3 in a wide range of editing applications that support .cube format LUTS. Such as Adobe Premiere CC, Adobe After Effects CC, Adobe Photoshop CC, Final Cut Pro X, Adobe Speedgrade, DaVinci Resolve.

171 Film Grade Creative ‘Looks’ & Classic Film Stock ‘Looks’ based on CINE4 gamma from Sony cameras. The classic DELUTS looks that you had in SLOG now available in CINE4 gamma, plus 34 Classic Film Stock Looks. Suppled in 16x16x16, 33x33x33 Lattice points in .cube format. Other formats available, please enquire for more details.

(Cine 4 set is based on s-gamut 3.cine but depending on what I'm shooting I sometimes use Pro colour for skin tones etc)

Also supplied in this pack are 'DELUTS LOG' luts. These let you use pre graded or Rec look footage to bring back to LOG (simulation). You can find these in ‘Basic Correction’ dropdown menu within Lumetri after installation.

Please read before installing.

Re. Product update: Adobe Premiere Pro CC 2015.3 to CC 2018 / DELUTS 

Please read all the way down.   

Adobe have updated CC applications and Adobe Premiere CC 2015.3 to CC 2018 and have slightly changed the way LUTs load into Premiere. Instead of loading the LUT .looks files that I created as a MAC installer and a Manual installer on PC.  

MAC: Adobe Premiere Pro Navigate to the Adobe Premiere Pro CC and right click or Control click and select ‘Show Package Contents’ Open folder called ‘Contents’ then ‘Lumetri’ and then ‘LUTs’ and then finally open the ‘Creative’ or ‘Technical’. Place instructed .cube files or folders into specified folders found with in the DELUTS download. Normally marked ‘Adobe Installers’. 

Example CC 2017:
Macintosh HD/Applications/Adobe Premiere Pro CC 2018/Adobe Premiere Pro CC

or from the Finder as a shortcut click ‘Go to Folder’ (Apple, Shift G) and paste in for ‘Creative’   

/Applications/Adobe Premiere Pro CC 20187/Adobe Premiere Pro CC

and then for ‘Technical’

/Applications/Adobe Premiere Pro CC 2018/Adobe Premiere Pro CC   

This will take you to the correct locations.

If you send projects to Adobe Media Encoder then you will need to do the same with that application. The ‘Creative’ and ‘Technical’ folders of Adobe Media Encoder and Adobe Premiere should always match to get the selected look on render.

Example CC 2015.3:
/Applications/Adobe After Effects CC 2015.3/Adobe After Effects CC 

/Applications/Adobe After Effects CC 2015.3/Adobe After Effects CC

You can also use DELUTS in Adobe Photoshop. You can find them in Adjustments/Color Lookup/3DLUT File dropdown list.   

/Applications/Adobe Photoshop CC 2015.5/Presets/3DLUTs     

PC: For PC generally speaking locate your ‘Adobe’ folder in ‘Program Files’ and open the ‘Creative’ or ‘Technical’. 
Place instructed .cube files or folders into specified folders found with in the DELUTS download. Normally marked ‘Adobe Installers’.   

Example CC 2015.3:
C:\Program Files\Adobe\Adobe Premiere Pro CC 2015.3\Lumetri\LUTs\Creative 

Example CC 2017:
C:\Program Files\Adobe\Adobe Premiere Pro CC 2017\Lumetri\LUTs\Technical

Same applies for Adobe Media Encoder and Photoshop (see MAC above for reference).     

Note: Please restart any Adobe applications after adding LUTS.

PLEASE READ: As ever please don't upgrade if you are part way through a project. And note down what looks and Luts you used in the sequence as I always suggest.  Opening a previous project will loose the link to that particular LUT so its very important that you manually add a lut once you have made a choice on what to use through the quick browser.  Its always a safe way to archive and deliver projects like this anyway.   


Manual and automatic installers can be found within the downloaded DELUTS set under Adobe Premiere Pro CC (2015) Installers. For Mac please launch the .mpkg package installer. For PC please follow the instructions.

MAC: Please set your Mac to allow apps download from ‘Anywhere’ under ‘Security & Privacy’ in your ‘System Preferences’ to allow this installer to run.

PC: Put the folder "DELUTS" found in the ‘PC’ folder within ‘Adobe Premiere Pro CC (2015) Installers’ into the location below. If a folder "DELUTS" already exists, place the containing folder i.e. “DELUTS SLOG2” or “DELUTS SLOG3”  inside "DELUTS" otherwise copy the enclosing folder also. If there are any zipped folders please unzip before installing. Same principle applies for CINE4.

File path below:
C:\Program Files\Adobe\Adobe Premiere Pro CC 2015\Lumetri\Looks\Cine Looks\

Put the remaining folder i.e. “LOG” into the location below:
C:\Program Files\Adobe\Adobe Premiere Pro CC 2015\Lumetri\LUTs\Technical

Its very important where you place the 'look' & 'Cube' files. Please ensure they are in their correct locations. Missing out a folder or changing names of LUTs will loose the file location and result in Red and White checkerboard when selecting a LUT.

Restart your application or preform a restart for the Luts to load.

Note: DELUTS ’Looks’ will add files & folders within this directory: Adobe Premiere Pro CC 2015/Contents/Lumetri/Looks/Cine Looks & also in your Application Support within you Library for Mac and C:\Program Files\Adobe\Adobe Premiere Pro CC 2015\Lumetri\Looks\Cine Looks\DELUTS for PC.

Please contact support [email protected] if your installation of Adobe Premiere Pro CC 2015 is not in the standard default location for Mac or not within C: drive on a PC. If you experience Red and White checkerboard when selecting a LUT this is normally the issue. I will do the best to give you support.


Location of installed LUTs and usage when using Adobe Premiere CC 2105:

Creative Looks will be available through the ‘Lumetri Color’ interface under the ‘Creative’ section.

Use ‘Basic Correction’ in the ‘Lumetri Color’ interface to control Exposure & White Balance for example.
Other LUT adjustments should be made in the Creative section of ‘Lumetri Color’ interface.
I find it best to apply an adjustment layer over the top of my cut, then adjust the Exposure / White Balance etc on the actual clip underneath, that way the LUT will work as intended.

Also supplied in this pack are 'DELUTS LOG' luts. These let you use pre graded or Rec look footage to bring back to LOG (simulation) so that you can apply one of the creative DELUT looks.

If you are using an older copy of Premiere that has limited ‘Lumetri’ function, you will still be able to load one lut at a time.


Please Note!
There is a limited number of 3rd party LUTs that can be loaded into Adobe Premiere CC 2015 at one time. If you have multiple DELUTS sets installed you may need to remove some luts from the folder inside the directory below. You can move whole sets outside this directory temporarily and place back when you need them again. I would suggest removing the LUTs that you are not frequently using to help this scenario. Please be careful if you are mid way through an edit when installing any plugins or looks.

C:\Program Files\Adobe\Adobe Premiere Pro CC 2015\Lumetri\Looks\Cine Looks\DELUTS

MAC: (Use ‘Show Package Contents’ on the .app to view contents by using ‘Control’ click)
Macintosh HD/Applications/Adobe Premiere Pro CC 2015/Adobe Premiere Pro CC Looks

Additionally please remember with Premiere Pro CC 2015 on Mac or PC, Adobe Looks from the speed dropdown menu within the Creative section of Lumetri colour window display and function in slot allocation. Installation of any additional 3rd party Looks will change the order of the dropdown menu in alphabetical order. This may effect the ‘look’ you have on open Projects. Or when reopening projects. If you come across this issue please remove the last installed set of looks, restart Premiere and note the Looks used in the project.

For project archive purposes I would suggest using the dropdown quick preview as a starting point to choose a lut then Manually adding the LUT to maintain consistent looks across different workstations or when recalling older projects.

(This doesn't effect LUTs that have been manually loaded into Lumetri)

Looks and LUTS are installed into Adobe Media Encoder much the same way as Premiere. The contents of Lumetri within these applications must be identical if you are using AME to export from. Otherwise you will not have the same matching settings with in your project. (this is a side effect from using the quick looks. Loading .cube files manually will not have this problem on export. Please check before exporting your project that this is the case. You can copy the contents of the installed DELUTS between Premiere and AME if need be.

Macintosh HD/Applications/Adobe Media Encoder CC 2015/Adobe Media Encoder CC Looks/
C:\Program Files\Adobe\Adobe Media Encoder CC 2015\Lumetri\Looks\Cine Looks\DELUTS

For other DELUTS sets please visit:
Powered by