Komatsu Crawler Dozers D65EX-18, D65PX-18, D65WX-18 sn: 90001 and up Workshop Service Manual

Original Illustrated Factory Workshop Service Manual for Komatsu Crawler Dozers D65. 
Original factory manuals for Komatsu Loaders, Dozers, Excavators contains high quality images, circuit diagrams and instructions to help you to operate, maintenance and repair your truck. All Manuals Printable, contains Searchable Text and Navigation Bookmarks
 
Covered models:
    D65EX-18 sn:90001 and up
    D65PX-18 sn:90001 and up
    D65WX-18 sn:90001 and up
 
Format: PDF, 2820 Pages
Language: English
 
Composition of Shop Manual
    This Shop Manual contains technical information necessary for services performed in workshops. It is divided
    into the following chapters for the easy of use.
    00 INDEX AND FOREWORD
        This section describes the index, foreword, safety, and basic information.
    01 SPECIFICATIONS
        This section describes the specifications of the machine.
    10 STRUCTURE AND FUNCTION
        This section describes the structure and operation of each component by system. "Structure and function" is
        helpful in not only understanding the structure of each component but performing troubleshooting.
    20 STANDARD VALUE TABLE
        The standard values for new machine and failure criterion are described for testing and adjusting, and troubleshooting. Use the standard values table to check the standard values for testing and adjusting, and judge troubles in troubleshooting.
    30 TESTING AND ADJUSTING
        This section describes measuring tools and measuring methods for testing and adjusting, as well as the adjusting  method  of  each  part.  The  standard  values  and  repair  limit  for  "Testing  and  adjusting"  are  described  in
        "Standard value table".
    40 TROUBLESHOOTING
        Troubleshooting of failure part and its remedy method on the occurrence of the failure are described. Troubleshooting is sorted by failure mode.
    50 DISASSEMBLY AND ASSEMBLY
        This section describes the special tools, work procedures, and safety precautions necessary for removal, installation, disassembly, and assembly of the components and parts. In addition, tightening torque and quantity and
        weight of the coating material, lubricants, and coolant necessary to these works are shown.
    60 MAINTENANCE STANDARD
        In this section, the maintenance standard value of each component is described. The maintenance standard
        shows the criteria and remedies for disassembly and assembly.
    80 APPENDIX
        The structure and function, testing and adjusting, and troubleshooting for all of the other components or equipment which cannot be separately classified are described together in the appendix.
    90 CIRCUIT DIAGRAMS
        This section describes hydraulic circuit diagrams and electrical circuit diagrams.
    Symbol
        Important safety and quality portions are marked with the following symbols so that Shop Manual is used effectively.
Powered by