BOMAG Soil Stabilizer, Asphalt Recycler MPH121 OPERATION & MAINTENANCE MANUAL

This is a COMPLETE Operation & Maintenance Manual for the BOMAG Soil Stabilizer, Asphalt Recycler MPH121.

Serial Numbers:
S/N 101 590 02 ....

Table of Contents:
=========
Technical Data
Safety regulations
Indicators and Controls
3.1 General notes
3.2 Description of indicators and control elements
OPERATION-
4.1 General notes
4.2 Tests before taking into operation
4.3 Starting the engine
4.4 Starting under low temperatures
4.5 Starting with jump wires
4.6 Driving the machine to work
4.7 Emergency exit
4.8 Operating the service brake
4.9 Operating the parking brake
4.10 Operating the hydraulic system emergency stop switch
4.11 Shutting the engine down
4.12 Parking on a slope
4.13 Preparing for work
4.14 Adjusting working depth, cutting depth
4.15 Switching the tempomat on and adjusting the nominal speed
4.16 Adjusting the tailgate
4.17 Steering the rear axle
4.18 Adjusting the oscillation angle of the rotor (cross-slope)
4.19 Water dosing system, preparing for work
4.20 Finishing work
4.21 Changing the tires
4.22 Towing
4.23 Transport
MAINTENANCE-
5.1 General notes on maintenance
5.2 Fuels and lubricants
5.3 Table of fuels and lubricants
5.4 Running-in instructions
5.5 Maintenance chart
5.6 Checking the engine oil level
5.7 Checking the fuel level
5.8 Checking the hydraulic oil level
5.9 Checking the condition of the cutting teeth
5.10 Checking front and rear tire pressures
5.11 Inspect the machine visually for damage and leaks
5.12 Checking the coolant level (compensation tank)
5.13 Checking the condition of the coolant
5.14 Checking, cleaning the water separator
5.15 Cleaning the lateral hood boxes
5.16 Cleaning the air conditioning condenser
5.17 Cleaning the cabin ventilation filter
5.18 Cleaning the dirt scrapers on the hydraulic cylinders for the rotor hood
5.19 Cleaning the charge air filter
5.20 Grease oscillating articulated joint and steering cylinder bearings
5.21 Greasing the lift cylinder bearings on the rotor hood
5.22 Grease the bearings of the lift cylinders on the rotor hood gates
5.23 Grease the oscillation joint and the rear axle steering
5.24 Grease the hinges of the battery compartment door
5.25 Cleaning front radiator (water/hydraulics)
5.26 Checking condition and tension of generator V-belt, replacing the V-belt
5.27 Check condition and tension of refrigerant compressor V-belt, replace the V-belt
5.28 Servicing the air conditioning
5.29 Checking the oil level in the rear axle reduction gear
5.30 Clean the breather valve for the reduction gear on the rear axle
5.31 Check the oil level in the rear axle
5.32 Clean the breather valve on the rear axle
5.33 Check the oil level in the left and right hand planetary gears on the rear axle
5.34 Battery service, check the main battery switch
5.35 Changing the engine oil
5.36 Changing the engine oil filter
5.37 Check the engine mounts
5.38 Draining the fuel tank sludge
5.39 1. Oil change in planetary gear
5.40 Changing the oil in the rear axle reduction gear
5.41 Change the oil in the left and right hand planetary gears on the rear axle
5.42 Change the oil in the rear axle
5.43 Checking/changing the coolant
5.44 Checking, adjusting the valve clearance
5.45 Changing the fuel filter
5.46 Changing the fuel precleaner
5.47 Check fastening of engine / turbocharger / combustion air hoses
5.48 Oil change in planetary gear
5.49 Changing the hydraulic oil
5.50 Changing the hydraulic oil fine filter
5.51 Tighten the screws on the articulated joint
5.52 Cleaning, changing the dry air filter cartridge
5.53 Replacing the cutting teeth
5.54 Grease the bearings of the lift cylinder for the cabin
5.55 Water sprinkler system, maintenance in the event of frost
5.56 Fill the container for the windscreen washer system, maintenance in the event of frost
5.57 Tightening torques for screws with metric unified thread
5.58 Conservation
TROUBLE SHOOTING-
6.1 General notes
6.2 Engine problems
6.3 Air conditioning system faulty

=========

Model Specification: BOMAG Soil Stabilizer, Asphalt Recycler MPH121
Language: English
File Format: PDF
Total Pages: 138
Requirements: Adobe PDF Reader
ZOOM IN/OUT: YES
Compatible: All Versions of Windows & Mac

=========

THIS MANUAL DESCRIBES PROCEDURES FOR OPERATION, HANDLING, LUBRICATION, MAINTENANCE, CHECKING, AND ADJUSTMENT. IT WILL HELP THE OPERATOR AND MAINTENANCE PERSONNEL REALIZE PEAK PERFORMANCE THROUGH EFFECTIVE, ECONOMICAL AND SAFE MACHINE OPERATION AND MAINTENANCE.

This PDF file is Bookmarked and SEARCHABLE to make what you need easy to find.

ALL MANUALS ARE WINDOWS 7, VISTA32 AND 64, XP, ME, 98, NT, 2000 COMPATIBLE AND WORK WITH MAC!

INSTANT DOWNLOAD UPON RECEIPT OF YOUR PAYMENT..

FIND IT...PRINT IT...USE IT...then Trash it.

Tons of pictures and diagrams at your fingertips!!

All pages are printable, so run off what you need & take it with you into the garage or workshop.

Save Money $$ By doing your own repairs! These manuals make it easy for any skill level WITH THESE VERY EASY TO FOLLOW, STEP-BY-STEP INSTRUCTIONS!

INSTANT DOWNLOAD means NO SHIPPING COST or WAITING FOR A CD OR PAPER MANUAL TO ARRIVE IN THE MAIL...YOU WILL RECEIVE THIS MANUAL TODAY VIA INSTANT DOWNLOAD ON COMPLETION OF PAYMENT VIA OUR SECURE PAYMENT PROCESSOR. WE ACCEPT ALL MAJOR CREDIT/DEBIT CARDS/PAYPAL.

Looking for some other Service Repair Manual, please check:
https://sellfy.com/fileto

Thanks for visiting!
Powered by